451+452+613 of Xebex International, Ltd.

Dupont Type Impact Tester
No.451 Model "H" Series

Widely used for measuring adhesive strength against impact of paint films (coatings) and for evaluating point impact strength of plastic sheets, etc.

Model H-50 (for paint)
- Testing method: JIS K5400, K5600
- Falling height: Max. 500mm (at every 50mm)
- Falling weight: 300g, 500g, 1,000g
- Radius of impact head: 1/2, 1/4, 3/16, 1/8, 1/16"
- Dimensions & weight: 46(W) x 30(D) x 76(H) cm, Net about 20kg

Model H-100 (for plastics)
- Testing method: ASTM D2794
- Falling height: Up to 1,000mm
- Falling weight: 1000g, 2000g
- Radius of impact head: 7.9mmR
- Dimensions & weight : 46(W) x 30(D) x 127(H) cm, Net about 25kg

Model H-200 (for plastics)
- Testing method: ASTM D2794
- Falling height: Up to 2,000mm
- Falling weight: 1000g, 2000g
- Radius of impact head: 7.9mmR
- Dimensions & weight: 46(W) x 30(D) x 226(H) cm, Net about 30kg

Catalogue

 
Sheet Impact Tester
No.452 Model H-100

This machine has been designed and manufactured to eliminate the defects of the Du Pont type and
Gardner type Impact Tester which have been used to measure impact strength of paint films and plastic
sheets, etc. It also aims at reducing operator’s working burden.

- Testing method: ASTM D2794 (for plastics), JIS K5400 (for paints)
- Falling height: Max. 1000 mm
- Height setting: Digital setting in 1mm steps
- Falling weight: Select one out of 300g, 500g, 1000g or 2000g
- Impact punch: Select one out of 12.7, 7.9, 6.3, 4.7, 3.2 or 1.6mm
- Radius of base: Select one out of 15.2, 8.1, 6.3, 4.7, 3.2 or 1.6mm
- Power source: AC 100V, 50/60Hz, single phase (supplied with a transformer for local voltage)
- Dimensions and weight: 55(W) x 35(D) x 150(H) cm, Net about 150kg

Catalogue

 
Falling Dart Impact Tester
Model No.613


Used for evaluating impact rupture strength by measuring impact energy applied to plastic films, etc.

- Testing method: ASTM D1709, JIS K7124/Z1702
- Aluminium dart & epoxy dart: dia. 38.10±0.13mm, 32±2g (method A)
- Stainless steel dart: dia. 50.80±0.13mm, 320±10g (method B)
- Falling height: 660mm (method A), 1,524mm (method B)
- Specimen clamp: dia. 127mm (inside diameter)
- Power: 100V AC, single phase (supplied with a transformer for local voltage)
- Dimensions & weight: 105(W) x 50(D) x 200(H) cm, Net about 170kg

Catalogue