Surface Roughness of Xebex International, Ltd.

Surface Roughness Measuring Instruments

Model SE 300

Easy control by touch panel and push button
Many parameters of different standards in one measurement
Real time surface profile recording with screen display or direct printout

- Parameters: (JIS B0601-2001/ISO4287-1997)
Ra,Rz,Rp,Rv,Rq,RSm,Rmr(c),Rδc,Rt,Rsk,Rku,R profile,BAC,ADC,
Pa,Pz,Pp,Pv,Pq,PSm,Pmr(c),Pδc,Pt,Psk,Pku,P profile,BAC,ADC
Wa,Wz,Wp,Wv,Wq,WSm,Wmr(c),Wδc,Wt,W profile,BAC,ADC
(DIN4776) Rk,Mr1,Mr2,Rpk,Rvk,A1,A2,R/P profile,BAC,ADC
- Measuring range: Vertical 800μm (Resolution: 0.0064μm), Horizontal 25mm
- Vertical magnification : 100,200,500,1000,2000,5000,10000,20000,50000,100000 & auto
- Horizontal magnification : 1,2,5,10,20,50,100,200,500,1000,25mm/λc, 50mm/λc
- Filter: (JIS2001/ISO97, JIS 94, ASME95) Gaussian, (DIN4776) Special Gaussian
- Measuring speed: 0.2, 0.5mm/sec.
- Display: 320 x 240 dot, Color LCD, touch-panel
- Printer: Thermal dot printer, 58mm paper width
- Memory: USB 8GB or less
- Power supply: AD Adapter, 90 to 264V AC, 50/60Hz, Output 9V DC
- Dimensions & weight: (Drive unit) 163(W) x 66(D) x 102(H) mm, 0.7kg
(Amplifier) 160(W) x 235(D) x 85(H) mm, 2kg
* Consisting of the following units as the standard accessories:
Amplifier (AS-300), Drive unit (DR-25x11), Pick-up (PU-A6), Stylus arm (AA2-60), Nose piece (ANA), Calibration specimen (SS-N), Roll paper (2 rolls)
* Analysis software for PC is included together with a connection cable.


Model SE 500

A high performance and compact surface roughness analyzing instrument

Easy control with touch panel and push buttons

- Measuring range: 800µm or 600µm (vertical), 55mm or 100mm (horizontal)
- Vertical resolution: 0.08nm
- Straightness: 0.3µm/55mm or 0.2µm/100mm
- Vertical magnification: 50,100,200,500,1000,2000,5000,10000,20000,50000,100000,200000 & auto
- Horizontal magnification: 1 to 1000 auto
- Auto leveling: Auto range, first half, second half, central half, two points, parabola
- Drive speed: 0.05, 0.1, 0.2, 0.5, 1.0, 2.0 mm/sec.
- Interface: RS-232C
- Power supply: 90 to 240V AC, single phase, 50/60Hz

* Several different types are available depending on the mode of use.


Model SE 3500

High performance and PC "Windows" controlled machine

Free layout data chart, full international standards, and automatic measurement/automatic calibration

- For general 2D surface measurement
- Measuring system: Inductive (LVDT) pick-up
- Measuring range: 600µm (vertical), 100mm (horizontal)
- Magnification: v:50/100/200/500/1000/2000/5000/10,000/20,000/50,000/100,000/200,000/500,000 times h:2/5/10/20/50/100/200/500/1,000/2,000/5,000 times
- Resolution: 0.1nm (min.)
- Max. number of data points: 32,000 points
- Dimensions & weight: 60(W) x 40(D) x 59.3(H) cm, Net approx. 80kg (measuring section only)
* Consisting of the following with standard accessories:
- Pick-up PU-DJ2S, Drive unit DR-100 x 51, Bed with column SP-83DS2 (motorized column), Remote controller RC-83, Levelling stand ST-52, Controller AS-3500, Calibration specimen SS-G21, 220/100V transformer & Software <No PC/printer included>

* Some of Accessories in Option:
- Vibration absorbing table, SMB-1